Gastore Tank Kit Ducato/Boxer/Relay Excludes BBQ Point

Item: 30256

MPN: G-076

Gastore Tank Kit for Ducato/Boxer/Relay

available Available

Log in to view prices

Product Description

Getting rid of on-board Butane or Propane bottles have some very clear advantages including:

  • Significantly reduced cost of the Gas
  • Save valuable internal space – you can now pack more kit for your trip
  • Quick and easy fill ups on many petrol station forecourts
  • On board level indicator – no need to carry a spare bottle
  • No more freezing Butane – LPG goes to -42*C – enjoy those winter trips out
  • Reduced gas dropout holes required, so less holes in your van
  • Safer – reduced gas runs and connections inside vehicle
  • Installed inline with UKLPG CoP11 and NCC CoP306
  • Please Note this kit DOES NOT include the BBQ point.

This chassis model is shared by three manufactures,  namely the Fiat Ducato,  Peugeot Boxer and Citroen Relay.  Its wide choice of engines, great drivability and keen pricing, plus its ready availability in the used van market means it is a firm favourite for both the professional and home build van converter. 

For those converters who wish to install a refillable underslung LPG tank, and do not have any desire to become an expert at identifying all the different components required to complete an installation, then this Gastore Kit is for you and will provide you with everything from the cap on the fill point through to the regulator.  The kit also contains our unique low current, micro processor, CE approved, gas controller/display that allows the flow of gas to be controlled right from your tank.

This 25 litre tank fits in the space behind the vehicles exhaust silencer and will bolt up using existing hole positions in the stronger chassis members rather than thinner floor metal.   So no drilling required.  The front mounts double up with the silencer mounting brackets and the rear ones go up using the supplied nutserts.  Simple !!! .    The tank is then offered up and bolted to these Stainless Steel cross members.

Once the tank is in place you can look at mounting the fill point. this generally goes through the body at the base of the drivers side B pillar but can go wherever suits. A sill mounted version is also available upon request. The kit contains 3 metres of fill pipe to allow for easy routing up and over exhaust shields, through chassis members etc…

Hanging from the tank valve will be two wires 4 metres long,  one for the electronic solenoid, the other to the environmentally sealed level sender.  These cables can be run up to the inside of the vehicle and connected to the supplied double fused junction box along with the 12v feed from your leisure battery.  Mount the Gastore power saver solenoid control/display in your desired position and connect to the junction box.

This kit fits third generation chassis 2006 – present

The kit includes;-

25 litre tank

4.5 metre level gauge cable

4.5 metre solenoid cable

2 x stainless steel vehicle mount brackets

30mBar regulator

Through body bayonet fill point with houseing

3 m filler poly hose

600 m pig tail

2 x 8 mm hose connections

20 mm grommet

Electronic solenoid control and level gauge

Electrical junction box

4 x M8 Hex rivnuts and bolts

6 x hose p clips

Tank and value cerficates

Instructions

Log card

You Can Also...

Get help or share this product...

print this pagebookmark and share